OMC520

PC Compatible Intel Atom CompactPCI Single-Board Computer



High-Lights:

  • Swiss Made Quality Product
  • Especially developed to be applied in industrial environment
  • High computing power and low power consumption enabled by Intel Atom N270 CPU
  • Passive Cooling
  • Expandable by a PCI or PC/104+ card
  • Result of long lasting experiences in developing CNC systems



Tailored to the specific requirements of an industrial PC:

CPU / Chipset Embedded Intel Atom N270 1.6GHz, Intel 945GSE/ICH7M/GMA950
Main Memory (DRAM) up to 2GByte
Non-Volatile Memory (NVRAM) 1MByte. No battery is necessary for data preservation. Can be used by the application in the same way as standard main memory.
BIOS Designed for industrial applications. No battery is necessary to keep the configuration settings.
Compact Flash Slot To use CompactFlash cards for operating system, application, and user data.
PCI und PC/104+ Slot Expandable by a PCI (90 degree angle adapter available as accessory) or PC/104+ card.
Profibus DP Slave Interface To easily connect to nowadays often employed PLCs.
Timers Two additional interrupt-capable high-resolution timers (50us minimum).
Fast Digital Inputs and Outputs Four fast interrupt-capable isolated digital inputs and four fast isolated digital outputs.
High-Resolution Programmable Watchdog Security due to short reaction time (50us minimum) for critical applications. Isolated.
Real-Time Clock With battery or super-capacitor for powering the Real-Time Clock.
Serial Interfaces Two serial interfaces, separately configurable to RS232C, RS485, or RS422.
Common PC Interfaces 2xUSB 2.0, 10M/100Mbit/s Ethernet, VGA, PS/2 keyboard, diskette drive.
Ports on Front Panel Directly from the front panel accessible ports: Ethernet, 2xUSB, 2xRS232C/485/422, Profibus DP, VGA, CompactFlash, Watchdog, digital Inputs and Outputs, Slot for PCI or PC/104+ card.
Power Requirements less than 10Watt
Ambient Conditions ambient temperature 0 to 40C
Operating System Fully supported by OAGLinux, which is especially made to be adopted in industrial real-time applications. No battery necessary. In normal operation mode, no write accesses to the CompactFlash device.

Downloads

OMC520

Operating Instructions OAGLinux V2.2

Assembly and Maintenance of the CNC D500